Raion at 03:41, 21 September 2025

2025-09-21T03:41:08Z

← Older revision		Revision as of 03:41, 21 September 2025
Line 1:		Line 1:
	For the rackmount variant of the SGI Onyx 350 branded as a Tezro, see Origin 350.		[[File:Tezro Front.jpg\|alt=The front of an SGI Tezro, courtesy of Irinikus\|thumb\|The front of an SGI Tezro, courtesy of Irinikus]]
			For the rackmount variant of the SGI Onyx 350 branded as a Tezro, see [[Origin 350]].

	The Silicon Graphics Tezro (styled as silicon graphics tezro) is a high-end workstation introduced by Silicon Graphics in July 2003 to replace the Octane. Built on the Chimera architecture, the Tezro is closely related to the Origin 350 and Onyx 350 systems offered by SGI during the same time period and shares the graphics module, node boards, drive sleds and some cooling parts. The Tezro is essentially a single-node Onyx 350 mounted on its side and connected like a sandwich to the IO backplane. The system was succeeded late in 2006 to early 2007 with the launch of the Prism. The Onyx4 launched alongside it, though that utilized the ATi developed UltimateVision. This distinction makes the Tezro the last machine designed by SGI to use an in-house graphics architecture. The Tezro is highly sought after in the collector market for its style, power, and for the distinction of being SGI's last MIPS workstation.		The Silicon Graphics Tezro (styled as silicon graphics tezro) is a high-end workstation introduced by Silicon Graphics in July 2003 to replace the Octane. Built on the Chimera architecture, the Tezro is closely related to the Origin 350 and Onyx 350 systems offered by SGI during the same time period and shares the graphics module, node boards, drive sleds and some cooling parts. The Tezro is essentially a single-node Onyx 350 mounted on its side and connected like a sandwich to the IO backplane. The system was succeeded late in 2006 to early 2007 with the launch of the Prism. The [[Onyx4]] launched alongside it, though that utilized the ATi developed [[UltimateVision]]. This distinction makes the Tezro the last machine designed by SGI to use an in-house graphics architecture. The Tezro is highly sought after in the collector market for its style, power, and for the distinction of being SGI's last [[MIPS]] workstation.

	== Features ==		== Features ==
Line 46:		Line 47:
	=== Operating System Support ===		=== Operating System Support ===
	The Tezro was supported beginning with IRIX 6.5.15, through the final 6.5.30 release.		The Tezro was supported beginning with IRIX 6.5.15, through the final 6.5.30 release.

			[[Category: Hardware]]

Raion: Created page with "For the rackmount variant of the SGI Onyx 350 branded as a Tezro, see Origin 350. The Silicon Graphics Tezro (styled as silicon graphics tezro) is a high-end workstation introduced by Silicon Graphics in July 2003 to replace the Octane. Built on the Chimera architecture, the Tezro is closely related to the Origin 350 and Onyx 350 systems offered by SGI during the same time period and shares the graphics module, node boards, drive sleds and some cooling parts. The Tezro..."

2025-09-21T02:50:51Z

Created page with "For the rackmount variant of the SGI Onyx 350 branded as a Tezro, see Origin 350. The Silicon Graphics Tezro (styled as silicon graphics tezro) is a high-end workstation introduced by Silicon Graphics in July 2003 to replace the Octane. Built on the Chimera architecture, the Tezro is closely related to the Origin 350 and Onyx 350 systems offered by SGI during the same time period and shares the graphics module, node boards, drive sleds and some cooling parts. The Tezro..."

New page

For the rackmount variant of the SGI Onyx 350 branded as a Tezro, see Origin 350.

The Silicon Graphics Tezro (styled as silicon graphics tezro) is a high-end workstation introduced by Silicon Graphics in July 2003 to replace the Octane. Built on the Chimera architecture, the Tezro is closely related to the Origin 350 and Onyx 350 systems offered by SGI during the same time period and shares the graphics module, node boards, drive sleds and some cooling parts. The Tezro is essentially a single-node Onyx 350 mounted on its side and connected like a sandwich to the IO backplane. The system was succeeded late in 2006 to early 2007 with the launch of the Prism. The Onyx4 launched alongside it, though that utilized the ATi developed UltimateVision. This distinction makes the Tezro the last machine designed by SGI to use an in-house graphics architecture. The Tezro is highly sought after in the collector market for its style, power, and for the distinction of being SGI's last MIPS workstation.

== Features ==
The Tezro is powered by the MIPS R16000 series of processors and came in dual and quad CPU node boards. The CPUs are attached to the node board, thus a configuration upgrade requires removal of the entire node board.
{| class="wikitable"
| colspan="3" |CPU Configurations
|-
|CPU Cache
|Dual (MHz)
|Quad (MHz)
|-
|4MB
|700,800
|700,800
|-
|8MB
|700,800
|700,800
|-
|16MB
|1000MHz
|1000MHz
|}
The Tezro can take anywhere from 512M to 8G of DDR RAM, using the same proprietary DIMMs as the Fuel, Origin/Onyx 300,350, and 3000 series.

A maximum of two 300GB U160 SCSI drives can be added to the system via the front access panel using the Origin/Onyx 350-style sleds.

Tezro supports the V10 and V12 graphics options. Dual-channel options were produced, allowing up to two 1920x1200 displays. The V12 was the only **shipped** configuration, but some machines were field replaced with V10s, or have been replaced by end users to re-purpose V12s for other machines.

The IO9 card provides SCSI backplane support, 3.5mm Audio, and a 100Mbit Ethernet port. Six PCI-X slots can provide additional cards, such as network cards, SCSI cards, Firewire, extra audio and more. A DMedia card can be added to provide DMedia support as well.

Two USB ports and PS/2 are provided. USB Mass storage is not supported for the SGI PROM and by IRIX.

=== Hardware Problems ===
The fans are controlled by environmental monitoring and the system will refuse to boot if the fans do not all respond.

The 1GHz/1000MHz CPU boards are known to overheat quickly due to inadequate airflow in the case. It's advisable to set external temperature monitoring and alarms and to not run the machine unattended, as this risks VRM or CPU failure. The latter means a new node board.

=== Form Factor and Transportation ===
The Tezro measures 21 x 14 x 17 inches in L x W x H dimensions and weighs at minimum 61lbs, more if it is heavily equipped. The front access panel is very fragile, and the system should not be held by the plastics as they grow brittle with age.

The unit has wheels on the rear, allowing for easy movement on hard surfaces. It should be carried gently and preferably with the rear of the unit supporting the weight, not the sides or the front.

=== Operating System Support ===
The Tezro was supported beginning with IRIX 6.5.15, through the final 6.5.30 release.

Tezro - Revision history

Raion at 03:41, 21 September 2025